Omicron CMGPS GPS Module

GPS-based Synchronization Unit When performing end-to-end tests of line protection schemes, it is necessary to start several test sets simultaneously. The CMGPS is a GPS-based synchronization unit which is used with the CMC/CMB test set
	Application The CMGPS receives signals from the satellites of the Global Positioning System (GPS) and provides an output at a time specified by the user. This clock output is then used as a trigger input to start the CMC test set. The CMGPS has been developed to fulfill the requirements of testing in the field, because off the shelf GPS-receivers have many drawbacks (size, weight, complicated operation, etc.). Further Information CMGPS is typically ready for operation just 5 minutes after start up. The synchronizing pulse can be configured according to the requirements of the application. The software is both integrated in the testing modules (like the State Sequencer) and also provided as a stand-alone application. It allows for the setting of: first output pulse, pulse rate, and polarity.
Two independent timing pulses are available via separate connectors, on a 16-pin plug (Pulse out 1) which is connected to the CMC test set (ext interface) and on two 4mm banana plugs (Pulse out 2).
	Scope of delivery CMGPS antenna, 15m antenna cable, plug-in power supply, 16-pole LEMO cable CMC-CMGPS, user manual, carrying bag. Option 2 x 20m antenna cable (replacing the 15m cable) including 2 x SMA adapters if the standard cable is too short.