Fluke i200s AC Current Probe

i200s Current Clamp for use with DMM's, Oscilloscopes, ScopeMeters and Power Quality Analyzers

Small sized, convenient-to-use current clamp
The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.

Features

Measuring range: 0.1 to 24A and 0.5 to 240A.
The output signal is 100 mV/A in the 20A range and 10 mV/A in the 200A range.
Includes BNC connector making it suitable for use with any oscilloscope, power analyzer or ScopeMeter" test tool having a compatible BNC input connector.
Dual banana to BNC adapter is included for use with DMMs.
Maximum current 240A ac.
40 Hz to 10 kHz frequency response.
Jaw opening 21 mm.
Maximum conductor size 20 mm dia. or busbar 20 x 5 mm
EN61010, CAT III 600V
One year warranty.

Specifications

Nominal Current Range	20 Amp 200 Amp
Continuous Current Range	0.1 Amp to 24 Amps 0.5 Amp to 200 Amps
Maximum Non-Destructive Current	240 Amps
Lowest Measurable Current	0.1 Amp
Basic Accuracy	1.5% +0.5 Amp (48Hz to 65Hz) (% of reading + floor-spec)
Useable Frequency	40 Hz to 10kHz
Output Level(s)	100 mV/Amp 10mV/Amp
Safety	CAT III, 600 Volt
Maximum Voltage	600 Volt AC

General Specifications

Maximum Conductor Diameter	20mm
Maximum Conductor Size (busbar)	20mm x 5mm
Output Cable Length	2.0 meters
BNC Adapter	Yes
BNC to Banana Adapter (included)	Yes

Rental Inquiry Information
Reference:	i200s
Description:	Fluke i200s AC Current Clamp