| Double
Your Power
A maintenance and calibration tool
that will be at home in every instrumentation technician's tool
box, the Fluke 787 ProcessMeter™ combines a DMM and a Loop
Calibrator in one rugged, handheld tool, for about what you would
expect to pay for a loop calibrator alone. Based on the trusted
Fluke 87 DMM, the 787 adds the ability to measure, source, and
simulate dc loop current with 0.05% accuracy and 1 microamp
resolution.
|
|
Features
- Simultaneous mA and % of scale
readout on mA output.
- 25% Manual Step plus Auto Step
and Auto Ramp on mA output.
- Clear LCD with backlight;
4,000 counts (30,000 counts for dc current)
- Min/Max/Average/Hold/Relative
modes.
- Externally accessible battery
for easy battery changes.
- 1000V overload protection on
V, ohms, frequency.
- 150V overload protection on
mA, backed up by 440 mA 1000V fuse.
- Designed to meet 1000 volt IEC
1010 Cat III standards.
DMM and loop calibrator in one
tool.
Precision 1000V, 440 mA digital multimeter.
- Measure ac and dc volts, ac
and dc current, resistance, continuity, and frequency.
- 0.1% dc voltage accuracy.
- 0.05% dc current accuracy, 1
‘A resolution to 30 mA.
- Simultaneous mA and % of scale
readout.
- True rms ac voltage
measurement to 1 kHz.
- Frequency measurement to 20
kHz.
-
Min/Max/Average/Touch-Hold/Relative modes.
- Diode test and continuity
beeper.
DC current source/loop
calibrator.
- 20 mA current
source/simulator.
- Simultaneous mA and % of scale
readout.
- Manual step (25%, coarse,
fine) plus auto step and auto ramp.
Fluke 787 Overview (PDF)
(documents are in PDF format and will open in a new window) |
|
