|
The Fluke 726 Precision Multifunction Process
Calibrator is designed specifically for the Process Industry with
broad workload coverage, calibration power and unsurpassed accuracy
in mind. The 726 measures and sources almost all process parameters
and can calibrate almost anything. The 726 will also interpret
results without the help of a calculator and store measurement data
for later analysis. |
 |
Features
-
More precise measurement
and calibration source performance, accuracies of 0.01%.
-
Two separate channels;
measure, source and view process signals simultaneously.
-
Measure volts, mA, RTD's,
thermocouples, frequency, and resistance to test sensors and
transmitters.
-
Source/simulate volts,
mA, RTD's, thermocouples, frequency and pressure to calibrate
transmitters.
-
Measure or source
pressure using any of 29 Fluke
Pressure Modules.
-
Source mA with
simultaneous pressure measurement to conduct valve and I/P tests.
-
Integrated pressure
switch test allows you to capture the set, reset and deadband of a
switch.
726 Process Calibrator Specifications |
-
Memory storage for up to
8 calibration results, return stored calibration data from the
field for later analysis.
-
Transmitter error %
calculation, interpret calibration results without a calculator.
-
Perform fast linearity
tests with auto step and auto ramp features.
-
Power transmitters during
test using 24V loop supply and simultaneous mA measurement.
-
Store frequently-used
test setups for later use.
-
Frequency totalizer and
frequency pulse train source mode for enhanced flowmeter testing.
-
HART mode inserts 250 ohm
resistor in mA measure and source for compatibility with HART
instrumentation.
-
Custom RTD curves, add
calibration constants for certified RTD probes for enhanced
temperature measurement.
|
|
