| |
|
The model 43B provides power
quality analysis plus a scope and a meter.
The 43B Power
Quality Analyzer performs the measurements you need to maintain
power systems, troubleshoot power problems and diagnose equipment
failures. All in a rugged handheld package.
|
|
Features
- Combines the
most useful capabilities of a power quality analyzer, multimeter
and scope.
- Calculates
3-phase power on balanced loads, from a single-phase
measurement.
- Measure
power harmonics and captures voltage sags, transients and inrush
current.
- Monitoring
functions help track intermittent problems and power system
performance.
- Menus use
familiar electrical terminology.
- Toggle
through the most commonly used power quality modes with a single
keystroke.
- Records two
selectable parameters for up to 16 days.
- 20
measurement memories to save/recall screens and data with cursor
readings.
- FlukeView®
Software can log harmonics and all other reading over time.
- FlukeView®
Software provides a complete harmonics profile up to the 51st
harmonic.
- Measures
resistance, diode voltage drop, continuity, and capacitance.
-
Users/applications manual and power quality video to help answer
tough questions.
- Complete
package with voltage probes and 500A current clamp,
FlukeView® Software and optically
isolated interface cable.
Model 43B Specifications (PDF)
(documents are in PDF format and will open in a new window) |
|
| General Specifications |
|
Power |
Line voltage
adapter/battery charger included
Installed battery: Rechargeable NiCd pack (4 to 6 Vdc)
Operating time: 4 hours
Charging time: 4 hours (Fluke 43B off) 12 Hours (Fluke 43B
on)
Refresh Cycle: 8 to 14 hours (to keep NiCd battery capacity
optimal) |
|
Environmental |
Temperature:
0ºC to 50ºC (32ºF to 122ºF)
Environmental: MIL 28800E, Type 3, Class III, Style B
Enclosure: IP51 (dust, drip water proof) |
|
Mechanical Data |
Size: (H x W x D)
232 x 115 x 50 mm (9.1 x 4.5 x 2 inches)
Weight: 1.1 kg (2.5 lbs) |
|
Safety |
For measurements on
600 Vrms Category III installations, Pollution Degree 2, in
accordance with EN61010-1 (1993) (IEC1010-1), ANSI/ISA S82.01-1994,
CAN/CSA-C22.2 No. 1010.1-92 UL3111-1
Surge protection: 6 kV on input 1 and 2
Floating measurements: 600 Vrms from any terminal to ground. |
|
| |
| Rental Inquiry Information |
| |
|
Reference: |
43B |
|
Description: |
Fluke 43B Power Quality Analyzer |
| |
|
|
