OMICRON's PC controlled test sets generate the test signals digitally, resulting in highly accurate testing signals even at small amplitudes. The electronic design of the internal amplifiers and the use of switch mode power supply units ensure a minimum of weight and volume is achieved. Independent channels with low-level signals are available at the back of the test sets, which can be used to control external amplifiers for applications requiring more signal channels or higher currents, voltages or power. The low-level signals can also be used for test objects which have a low-level input facility.

All generators are continuously and independently adjustable in amplitude, phase and frequency. No switching of ranges is necessary. All current and voltage outputs are fully overloaded and short-circuit proof and are protected against external high-voltage transient signals and over-temperature.

Every device is developed according to international IEC standards and verified by independent certification bodies including UL and TÜV.

• AC Voltage Output: 4 x 300 Volt.
• AC Current Output: 6 x 12.5A or 3 x 25A or 1 x 75A.
• DC Voltage Output: 0 to 264V.
• 4 x binary outputs.
• 10 x binary inputs/Analog measurement inputs.
• Automatic or Manual Testing. (using Test Sheets)

CM256 Datasheet (PDF)
(documents are in PDF format and will open in a new window)